1. Do not tow a vehicle with a malfunctioning engine, an abnormal steering system, or a damaged brake system.

2. Do not carry unfixed or loosely stacked goods, and be careful to carry large-sized goods.

3. When driving on a slope, drive carefully. When driving on a slope greater than one-tenth, the forklift should drive forward on the uphill and backward on the downhill. Avoid turning when the forklift is driving. Carry out loading and unloading operations.

4. No people are allowed to stand on the forks and no people are allowed on the truck.

5. Check the control and alarm devices before driving. If they are damaged or defective, they should be operated after repairs.

6. People are not allowed to stand under the fork or walk under the forklift.

7. When driving, pay attention to pedestrians, obstacles and potholes, and pay attention to the clearance above the forklift.

8. It is forbidden to manipulate vehicles and attachments from positions other than the driver's seat.

9. Unauthorized driving and neutral gear rolling are strictly prohibited. Electric forklift.

10. When driving on the wharf or temporary paving, be careful and drive slowly.

11. Do not go up and down when the forklift is running. Please use the safety pedal and safety armrest of the forklift when getting on or off the forklift.

12. Only drivers who have been trained and hold a driving license can drive. Driving a forklift on the highway requires at least a Class B driving license. To operate the forklift in the work area, you must have a written driving permit issued by the employer. Drivers should not drive under the influence of drugs and alcohol, this is the basic safety operation guidelines.In addition, no modification is allowed without the permission of the supplier or manufacturer.

13. When leaving the vehicle, lower the fork to the ground and place the gear handle in neutral, turn off the engine and disconnect the power supply; when parking on a ramp, pull the parking brake device well, and use pads when parking for a long time Pad the wheels.

14. Start, turn, drive, brake and stop smoothly. On wet or smooth roads, slow down when turning.

15. For high-lift trucks with a lifting height greater than 3 meters, attention should be paid to the lifting of the cargo above, and protective measures must be taken when necessary.

16. It is strictly forbidden to operate the forklift with the clutch in a half-clutch state.

17. When handling, the specified value should not be exceeded. The forks must be inserted under the goods, and the goods should be evenly placed on the forks. A single fork is not allowed to transfer the goods.

18. When turning, follow the traffic rules and turn on the turn signal.

19. Regularly check oil and water leakage, deformation, looseness, etc., ignoring the inspection will shorten the life of the vehicle and cause accidents under severe conditions.

20. For high-lift forklifts, the mast should be tilted backwards as much as possible, and the loading and unloading operations should be tilted back and forth within the minimum range.

21 Do not use an open flame to check fuel level, electrolyte or cooling water and leakage.

22. When refueling, the driver should not be in the car and turn off the engine. When checking the level of the battery or fuel tank, do not ignite.　

23. The cargo should be lowered as far as possible while loading, and the mast should be tilted backward. Forklift